Torque Converter

[231power]

Looking for a new or used torque converter, the stock one is giving up - my specs on the '87 GN are below - I'm on the stock turbo but I'd like to go to a TA 49 or TE 44 maybe next summer. The car is a summer cruiser, so I don't need anything too crazy, but would prob like to upgrade from stock.

 

[3.8L V-8 eater]

I think a 10" converter at 2600 to 2800 would be good for what you are looking for.........

 

[marleyskater420]

I have a PTC 10" that was rated for my 6262, supposed to stall @3-3200. Would be a great street converter. Has less than 200 miles on it. Decided to go with a 9.5" instead.

 

[FLAT BOOSTED]

I think a 10" converter at 2600 to 2800 would be good for what you are looking for.........

^x2..anything more wouldnt be beneficial with your combo... just my .02 worth.

 

[QWKRTNU]

I have a used Vigilante single disk lock-up. 3000 stall

 

[Bob Shaw]

Looking for a new or used torque converter, the stock one is giving up - my specs on the '87 GN are below - I'm on the stock turbo but I'd like to go to a TA 49 or TE 44 maybe next summer. The car is a summer cruiser, so I don't need anything too crazy, but would prob like to upgrade from stock.

I have a new B&M Holeshot converter, part#70426. Never been installed.
$300. 660-826-7275.

 

[Ttype6]

I have a 10" Art Carr non lock 2800 stall.

 

[huntsg]

I have an orange stripe available. Has about 3000 miles on it.

 

[231power]

Still looking for a 2600 - 2800 stall lockup converter.

 

[Buickrat]

I have a new Hughes 2500 stall D5 with warrenty for $250 plus the ride.

 

[toofastforyou]

Looking for a new or used torque converter, the stock one is giving up - my specs on the '87 GN are below - I'm on the stock turbo but I'd like to go to a TA 49 or TE 44 maybe next summer. The car is a summer cruiser, so I don't need anything too crazy, but would prob like to upgrade from stock.

If you ever decide you want a stock one again, I have a very low miles original one out of my own GN: $75. + shipping...

Claude.