Trans Pan

[Dreamn4GN]

okay, so I read up on the sticky of strengthening the 200. Talked about the rear sump pans. Are these recommended for every application over stock? Seems that on,y CK performance has or is offering the rear sump pan, and it's out of stock. Shoukd I wait for it to come back into stock, or just buy one of the bigger pans other vendors have? Pretty much wondering if a rear sump pan is recommended for my application. Street car , goto track maybe few times and only taking car into the mid 11's....hopefully. My thinking is for the same price or a few bucks more why not go with the rear sump. But I'm a noob and never had a 200 rebuilt. Any info appreciated.

 

[TexasT]

http://web.archive.org/web/20070319220417/http://www.drwtransmission.com/thm_200-4r.htm

If you have the money a deep pan with the bottom feed filter is a good investment.

 

[David Husek]

The stock pan is more than you will ever need in the 11's. But, if you want a billet pan, I have them in stock.

 

[Sweet6]

What filter does that use Dave?

 

[34blazer]

That's a filter found on various Chrysler transmissions. TF727, A518, 46RE, etc...

Newer versions of that filter are bottom feed

 

[David Husek]

What filter does that use Dave?

As stated above, it is a 727 filter

 

[87gn-newbee]

Dave can you pm me price on that set up? Thanks

 

[Dreamn4GN]

Thanks Dave can you also PM me a price for that kit as well. Thanks again

 

[Sweet6]

Thanks for the info. I have one of the pans that Dave mentioned. Very nice piece.