turbo step up?

[Cleaner13]

ok these are my following mods thus far


Gauges boost, temp, oil, tach, knock, air fuel, fuel pressure

RJC Powerplate

92Thrasher chip

THDP with cutout and dump

Duttweiler Neck

Engine Tie Down

ash tray Switch Plate torque converter, fan relay, fuel pump

Pinion Snubber

Volt Booster

Big Mouth Intake

B& M Tranny Cooler

160* Thermostat

Racetronix plug and play with fuel pump

Driveshaft Loop

Adjustable Fuel Pressure Regulator

Scan Master

2 pod Console Pillar

Hooker Exhaust or the dual atr exhaust

HRPartsNstuff lower and upper control arms

Upgraded Crossover Pipes

Aluminum Pulley

CAS Radiator

Jay Jackson Throttle body and Plenum port and polish upgrade

Ramchargers Boost Controller

GTA Black Honeycomb wheels

recalidbrated 145MPH Speedo

Eibach lowering spring kit

Shocks what kind should I get?

3 Pod A-Pillar Lotek

Rear Seat Brace Kit

Shift Kit

SMC alky kit



what turbo is a good step up from stock? I want something reliable and not have to worry about rebuilds and such, but I want a moderate to fast spool up with some good potential power, this is about as far as I am gonna go with upgrades, so what would be good for my setup and where could I get this turbo at

thanks alot guys

Carl

 

[fly89gta]

i didn't see injectors on that list, something that needs to be done with an upgraded turbo

A few guys i know that upgraded from stock are running TE-44's or TA-49's but it all depends on what you want to run

I'd upgrade the injectors to either Blue Tops or MSD 50's, the stockers won't cut it.

I'm sure other people with more knowledge will chime in, but this is what i've seen people upgrade to

 

[Cleaner13]

thanks alot man


I also failed to mention that I do not want to change the converter if I dont have too

Carl

 

[Mile Hi GN]

TE-44 / TA-49 and Blue Tops / MSD 50's. A tried and true combination that has worked for thousands of us and it can be done with the stock converter.

Call Patrick at:

Precision Turbo & Engine

You are going to need a new chip with your injector choice and he can help you with that as well.

Good Luck,