Turbo Suggestions

[FRCEFED6]

Hey guys, well it is getting about time to purchase a new turbo. the pt 52 i have is gonna be way out done for the combo i have. i think i went a little overboard with this setup but what the hell its all about going really fast right? here is the run down of my combo : new style gn1 heads ported(249cfm intake/219cfm exhaust@.550) 224/224@.560 lift solid roller cam, intake is ported and flowed to match heads, thdp, trw pistons, atr 4340 h beam rods, steel mains and a girdle, stock TB, cartech frontmount, single 3 inch exhaust, 9 in art carr 3k stall. i know i am going to have to get some injectors around 85lb/hr and possibly a higher stall. just wanting to get a few ideas from people. the car will not be a daily driver. i was thinking along the lines of a pt-70 but there are so many different turbos out there. thanks again. jeremy

 

[azgn]

I imagine a 70 series turbo should serve you well.....until it goes boom....you will be over the edge for a stock block...but have fun!

(how fast are you going now?)

 

[FRCEFED6]

woody, my fastest time before was an 11.38@113 w/1.51 60ft.
i left on no boost and 3000 rpms. that was with a smaller turbo than the 52 and stock heads. i had a cam go flat(210/205) thats why its apart now. i know the next thing to go is gonna be the stock block. i will probably split a cylinder wall. that will be a bad day. until that happens i am think i will just have some fun. there is a hopped up viper i am gunning for. thanks. jeremy

 

[REDS HOT AIR]

John Craigs LT70-1 is bad azz