tpivette89
Member
- Joined
- Mar 27, 2002
- Messages
- 227
im trying to clean the intake side of my stock 85' GN turbo because of some oil that got in there due to a backed up PCV system. i removed the (4) 10mm bolts that seemed to hold the intake side to the cneter of the turbo, and i also removed the 2 bolts that held the wastegate solenoid. however, even after some gentle prybar use, the intake side of the turbo wont budge
how do i get it apart? do i have to loosen the bolt that seems to hold the inlet turbine on? thanks in advance
how do i get it apart? do i have to loosen the bolt that seems to hold the inlet turbine on? thanks in advance