Two quick questions (pushrods studs)

[87turbot-type]

Looking to buy some after market stock length pushrods. Any one know where to order these from? Will the comp cams 7869-12 work?

I also need a set of studs for my roller rockers and would like to know where to order these from or what part number from arp they are.

Champion irons with h/s roller rockers.

Thanks in advance.

 

[turbofabricator]

The Champion iron heads have 5/-16" x 18 threads, and any grade 8 bolt will work FINE. I use allen head bolts for clearance. (socket head bolts). FullThrottle has hardend push rods you need in stock.

 

[Lee Thompson]

true

The Champion iron heads have 5/-16" x 18 threads, and any grade 8 bolt will work FINE. I use allen head bolts for clearance. (socket head bolts). FullThrottle has hardend push rods you need in stock.

Factory iron head --I like to tap them a little deeper and use a little longer grade 8 bolt. The holes in the ones I had was already drilled but not tapped to the bottom. I have never had any trouble with the stock pushrods. IMO if you bend a pushrod it came from another problem.