Two transducers

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

hensleyt

Well-Known Member
Joined
Feb 20, 2008
Messages
1,555
I will be installing one on the fuel
what do I do with the second one?
OIL or ALKY
? number two
who has a Tee female AN-4 1/8 NTP AN-4 with a schrader valve for the fuel side
 
I will be installing one on the fuel
what do I do with the second one?
OIL or ALKY
? number two
who has a Tee female AN-4 1/8 NTP AN-4 with a schrader valve for the fuel side
Nobody. Guys are always building different configurations of fittings to make it work. Forget the Shrader valve...you don't need it.
Use the second one for ALKY.
 
If you don't want to log it, Julio makes a tester that you can use to see what the output of the pump is.
 
They also have a 200psi one.
 
Pronto, that's where I got mine. Look at their pics. It shows red = 5 volts. Is that correct?
 
Not sure on that. I used 12v on the different brand transducer I used.
 
I posted a pic from the ebay ad.
$%28KGrHqN,%21mEFHdMlyr,LBR501IFfUw%7E%7E60_3.JPG
 
After a little searching I might go for a 200psi
Look like max psi is 150 correct
 
Could be higher in new pumps according to the instructions in Julio's test kit.
 
Back
Top