You can type here any text you want

UPDATED** Buick Turbo V6 Grand National Engine Parts: Complete Rotating assembly, Pistons, Crank, billet caps, Turbo, Lifters_$800....

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

BUICKTIME

It's ah me, Mario!
TurboBuick.Com Supporter!
Joined
Aug 11, 2001
Messages
187
Rotator came out of a perfectly running engine that was taken out just to change the camshaft but with my luck I found a crack in the block and now parting out the engine. The engine and parts below have approximately 3k miles (*unless otherwise noted). I have plenty of pictures I can send on request. PLEASE do NOT waste MY time, serious buyers only, PLEASE!!! Don’t hesitate to ask any questions. Preferred Cash local pickup, especially for the bigger heavier items. Local pickup is Oceanside (Long Island), NY 11572

– Turbonetics 6965 (8 bolt compressor housing) 4 bolt exhaust housing with V-Band in great shape (this is a bada$$ turbo)_$800
– TA/Morel Hyd. Roller Limited Lifters TA-1412_$370
– Scorpion 1.55 Roller Rockers for GN1 Aluminum Heads (complete set with the correct center/off center & guides)_$370

– Stock Crank- cut .020 mains & .010 rods (more than likely will need to be cut)- (*mileage unknown)_$200

PENDING – Complete Rotating Assembly: 40 over Diamond Pistons, Scat Hbeam Rods w/ARp bolts, stock crank (10 under- rods & mains), balanced flywheel (SFI exp.) and balanced Harmonic balancer (complete externally balanced rotator)_$1,600 - PENDING
SOLD- 4x Billet Caps (2 centers, rear and front Main Caps)- USED_SOLD
SOLD- Stock Rods and pistons (*mileage unknown)_SOLD
SOLD- STAGE 2 Off Center- Ross pistons (4.020”) and 6.5” Carillo rods- ONLY 4 PIECES, hard to find and make for great back-ups (*mileage unknown)_SOLD
 

Attachments

  • 1-ENGINE PARTS (1).jpg
    1-ENGINE PARTS (1).jpg
    1 MB · Views: 0
  • 1-ENGINE PARTS (2).jpg
    1-ENGINE PARTS (2).jpg
    2.1 MB · Views: 0
  • 1-ENGINE PARTS (2.1).jpg
    1-ENGINE PARTS (2.1).jpg
    2.5 MB · Views: 0
  • 1-ENGINE PARTS (4).jpg
    1-ENGINE PARTS (4).jpg
    2.4 MB · Views: 0
  • 1-ENGINE PARTS (5).jpg
    1-ENGINE PARTS (5).jpg
    1.6 MB · Views: 0
  • 1-ENGINE PARTS (6).jpg
    1-ENGINE PARTS (6).jpg
    1.9 MB · Views: 0
  • 1-ENGINE PARTS (7).jpg
    1-ENGINE PARTS (7).jpg
    2.8 MB · Views: 0
  • 1-ENGINE PARTS (8).jpg
    1-ENGINE PARTS (8).jpg
    1.7 MB · Views: 0
  • 1-ENGINE PARTS (12).jpg
    1-ENGINE PARTS (12).jpg
    2 MB · Views: 0
  • 1-ENGINE PARTS (12.3).jpg
    1-ENGINE PARTS (12.3).jpg
    1.1 MB · Views: 0
Last edited:
more pics
 

Attachments

  • 20250504_010947.jpg
    20250504_010947.jpg
    2.1 MB · Views: 27
  • 20250504_011745.jpg
    20250504_011745.jpg
    2.4 MB · Views: 28
  • 20250504_011759.jpg
    20250504_011759.jpg
    2.1 MB · Views: 34
  • 20250419_144929.jpg
    20250419_144929.jpg
    1.8 MB · Views: 0
  • engine.jpg
    engine.jpg
    920.7 KB · Views: 0
Rotator came out of a perfectly running engine that was taken out just to change the camshaft but with my luck I found a crack in the block and now parting out the engine. The engine and parts below have approximately 3k miles (*unless otherwise noted). I have plenty of pictures I can send on request. PLEASE do NOT waste MY time, serious buyers only, PLEASE!!! Don’t hesitate to ask any questions. Preferred Cash local pickup, especially for the bigger heavier items. Local pickup is Oceanside (Long Island), NY 11572

– Complete Rotating Assembly: 40 over Diamond Pistons, Scat Hbeam Rods w/ARp bolts, stock crank (10 under- rods & mains), balanced flywheel (SFI exp.) and balanced Harmonic balancer (complete externally balanced rotator)_$1,600
– TA/Morel Hyd. Roller Lifters TA-1412_$400
– Scorpion 1.55 Roller Rockers for GN1 Aluminum Heads (complete set with the correct center/off center & guides)_$400
– Turbonetics 6965 (8 bolt compressor housing) 4 bolt exhaust housing with V-Band in great shape (this is a bada$$ turbo)_$850

–SOLD- 4x Billet Caps (2 centers, rear and front Main Caps)- USED_SOLD

– Stock Crank- cut .020 mains & .010 rods (will need to be cut)- (*mileage unknown)_$250
– Stock Rods and pistons (*mileage unknown)_$150

– STAGE 2 Off Center- Ross pistons (4.020”) and 6.5” Carillo rods- ONLY 4 PIECES, hard to find and make for great back-ups (*mileage unknown)_ $200
Mario, I'm interested in the rotating assembly, .40 pistons, rods, crank, flywheel, balancer, What is your best price?
Are you going to Bowling Green next week?

Walt Mucha, Nashville TN, cell 615-838-6223 Mario, call me, I got cell blocker and I'll call you back. Thx.
 
Parts shipped and tracking sent. Listing will be updated shortly.
thank you fellas, Mario

Okay Walt, will contact you this morning
 
Back
Top