Using 110 on the street

[TRBON8R]

For those of you using 110 octane on the street, what kind of boost levels and timing are you running? Also what brand of fuel? Thanks.

 

[blackbuick87]

Sunoco 110 I can run 22psi on stock turbo with no knock. The key is to get all the 93/94 out

 

[bose]

boost

I can run 22 psi with 21 degrees of timing.I do not use the alcohol anymore,it is a pain to tune.Bruce

 

[blackbuick87]

I was running a 108 chip, around 27º of timing

 

[wiked87gn]

I was running 24 psi with alcohol and 18* timing chip with 1 to 2 degress of knock, ran 25psi on 112 with a 26* chip once at the track..

 

[MSDGN]

JL 110 chip...26 degrees timing...26 PSI boost...Unocal 110...I do add a little Sunoco 116 octane in for good measure...but can run 24 PSI boost(no knock) with just the 110 octane...

 

[Roc87]

MSDGN, what turbo you using?

 

[OneLethal87GN]

Re: boost

Originally posted by bose
I can run 22 psi with 21 degrees of timing.I do not use the alcohol anymore,it is a pain to tune.Bruce

So, ya ready to get rid of that pain in the butt alky kit yet???

 

[KEVINS]

Stock Turbo, ME16 pos, Sunoco 110, 28* (32* experimental timing) & 23psi..

hth's a bit
ks

 

[tim87tr]

Turbo T: With a mostly stock car and a Thrasher 100 chip, 22 psi in first on Torco 110 or 100 Xylene mix (5gal per tank) . Car on kill mode is addictive

GN mostly stock: I have some Trans + settings at 20 to 22 psi for a Xylene mix of 2 gal per tank (96 oct) and 5 gal per tank (100 oct) for the Extender chip and Redstripes if anyone is interested.