You can type here any text you want

V-Band Clamps for SS ATR Headers Needed!!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
they are on my car now , i took a little bit off the v flange with a grinder but with the proper spacer or gasket(s) it probably wasnt nescessary

i ended up using the inner steel shims from an 8.5 aftermarket rear diff shim pack , was ~2.5 inside diameter and ~2.9 outside and ~1/8" wide.

so far on the atr style ebay headers ive made several good passes, 10.56 (1.50 60) , 10.58 (1.49 60) , havent been able to get my 60ft down where i want but just last night with a 1.53 went 10.6 with the cars best mph ever of 128.92 . all done on 93 octane and 275/60-15 MT radials
 
Back
Top