valve cover breather stand

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

tonysmach

Member
Joined
Apr 26, 2006
Messages
617
Anyone know where I can get the valve cover breather stand that is screwed to the the valve cover. See picture. I got the picture from here but don't know whose car it is. It allows for the breather to be vertical instead of at an angle. Can't seem to find them.
 

Attachments

  • engine5.jpg
    engine5.jpg
    72.6 KB · Views: 533
  • engine3.jpg
    engine3.jpg
    72 KB · Views: 497
valve cover breather stands

Try Tom at Champion or Metco. Not 100% sure which, but it's either one or the other.



dave
 
This is also the one I use. I can't remember if I got if from Gbody or Metco. They both sell it.
 

Attachments

  • metcobuickbreather2.jpg
    metcobuickbreather2.jpg
    30.6 KB · Views: 398

Thanks for all the above links. However, all the above are for a stock vc where the breather stem has 2 tabs that lock into the VC. The ones in the picture look like they screw to the valve cover.
 
Let me know where if you find out as well. I saw them at a local car show and I am intrigue.
 
Cmon guy's those are not the same as the ones in the PIC. The ones in the PIC are bolted on. Those others are nice though.
 
Cmon guy's those are not the same as the ones in the PIC. The ones in the PIC are bolted on. Those others are nice though.

The ones listed from metco by rkhiperformance are thread and screw in. From the pic you can't really tell if the angled part and the flange that is actually screwed into the vavle cover are all one piece. They could have a threaded flange attached to the valve cover with screws and the metco threaded and angled breather screwed into the flange unless your seeing something i can't.
 
Champion makes those.

we have a set here if you want them... 56 + shipping...

413-789-0531

The ones in the pic (1st post) are from Champion.

The ones I have are made by me :biggrin:
 

Attachments

  • pic.jpg
    pic.jpg
    75.1 KB · Views: 204
The ones listed from metco by rkhiperformance are thread and screw in. From the pic you can't really tell if the angled part and the flange that is actually screwed into the vavle cover are all one piece. They could have a threaded flange attached to the valve cover with screws and the metco threaded and angled breather screwed into the flange unless your seeing something i can't.

they are a one piece billet angle that you need to drill and tap 4 holes for each angle adapter and then screw to the valve cover , they supplied an oring to go between the cover and the adapter but right stuff worked better
they take a std push in rubber breather or you can use a std grommet and the billet breathers

i have them on my covers but i bought them that way , i want to say the last time i did a set was in 2006 and i thought metco or champion was the source
, i just picked up a pair of the billet breathers like in the OP pic from my local speed shop at the track , looks a little better than the big breathers
 
Anyone know where I can get the valve cover breather stand that is screwed to the the valve cover. See picture. I got the picture from here but don't know whose car it is. It allows for the breather to be vertical instead of at an angle. Can't seem to find them.
Sorry to bring this thread back up from the past but was wondering if these valve cover tubes in the very 1st picture on the 1st post are still available and if so where I can get a pair?

Posted from the TurboBuick.Com mobile app
 
[quote="laws69cars, if these valve cover tubes in the very 1st picture on the 1st post are still available and if so where I can get a pair?[/quote]


I had got a pair like that from Jack Cotton - he suggested welding them on but screws will work. That was a few years ago though.........
not sure if he still carries them. http://www.cottonsperformance.com/
 
I've checked there and no luck but I'll keep searching. . Thank you

Posted from the TurboBuick.Com mobile app
 
Back
Top