By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!Update. With the above mentioned springs installed I am now running 10" in the front and 10" in the rear. I am sure things will settle a bit but the look is much better! As a plus, with the Bilstein shocks the ride has softened a bit which is a good thing.I am looking at MOOG 5606 springs for the front and MOOG CC627 variables for the rear. Would these be a good choice?
Update. With the above mentioned springs installed I am now running 10" in the front and 10" in the rear. I am sure things will settle a bit but the look is much better! As a plus, with the Bilstein shocks the ride has softened a bit which is a good thing.
I will try to take some todayI know I'm not you're favorite here, but pics would be cool.
We have a common goal.
November update. Height has settled to 9.5" front and 9.75" in the rear measuring from the pinch welds. Overall not as high as I would like but at least 1" higher front and rear than before. I wish the rear was just a tad higher. I was going to install a set of "Air Lift"air bags in the rear but the Pypes exhaust is too close to the springs.
There can be a significant difference in rear height between a full and empty gas tank.November update. Height has settled to 9.5" front and 9.75" in the rear measuring from the pinch welds. Overall not as high as I would like but at least 1" higher front and rear than before. I wish the rear was just a tad higher. I was going to install a set of "Air Lift"air bags in the rear but the Pypes exhaust is too close to the springs.
I'm having the same experience.The shocks seem to have settled down since first installed. Maybe I am getting used to the ride but it is nice and the car handles perfectly.
?A 300# MIL in the back seat will help...In the trunk, will help a bit more....
A 300# MIL in the back seat will help...In the trunk, will help a bit more....
Overall not as high as I would like but at least 1" higher front and rear than before. I wish the rear was just a tad higher.
You could try these if looking for 1/2" higher in the rear.
Hopefully a link shows up.
No link, but here's a photo.
View attachment 292777
It looks like the price is each, so (2) are required.
Maybe you can PM me with instructions on how to attach a link?
I can see where this would help lower the rear of the car, but maybe not so much to make the rear a tad higher.
A 300# MIL in the back seat will help...In the trunk, will help a bit more....