Wanted 109 or 4.1 block, Heads and rockers

[EricB]

Looking for a rebuildable 3.8 or 4.1 block Mine is cracked between the deck and lifter gallery. any info on where one might be would also be helpful. Also looking for a set of Champion GN1 heads and T&D rockers.
Thanks, Eric B

 

[1chance]

Just finished putting a 4.1 together. I did the assembly myself so i didnt plan to sell, but theres one in Augusta, GA at the pull a part, its in a 4 door cutlass.

 

[Nick McCardle]

Just finished putting a 4.1 together. I did the assembly myself so i didnt plan to sell, but theres one in Augusta, GA at the pull a part, its in a 4 door cutlass.

I hate to jump all over this...

But how recently did you see the one in Augusta? Got a buddy that's looking to build a 4.1 soon.

 

[EricB]

What wrecking yard? My parents live in Aiken SC.

 

[Nick McCardle]

What wrecking yard? My parents live in Aiken SC.

Pull-A-Part

 

[49-blues]

I have a good uncut #4291 4.1 block, .010/.010 fresh cut turbo crank, clevite bearings, arp main studs, 3 front brand new center billet caps, trw .030" over pistons with rings mounted on good 2 dot rods with arp bolts, comes with new 214/224 cam with brand new GM lifters, 14 bolt oil pan. looking for $1500. firm

 

[WeSS]

block wanted

I have an original 87 gn 109 block, standard rolled fillet crank, 2 dot rods, turbo pistons, upper/lower intake, iac, tps, throttle body, injectors, fuel rail, 233 fpr, stock cam, stock heads, flywheel, etc. Pretty much complete under 50,000 mile original all matching parts. No mismatch stuff. Took out of the car and preserved. Does not need overbore, pistons are perfect, no gouging on the top or top edges of the pistons from detonation, no gouging on the skirts, crank is standard and I have clevite .010 over bearings along with brass freeze plugs for it. Never built this just kept it for the last 13 years. Also have a set of fully ported m&a alluminum heads done by champion, individual roller rockers with studs and retainers, power 6 valve covers with the oring gaskets. I no longer plan on building anything like this so this stuff is available. Not sure of what it is worth. Tampa florida area.

 

[lou]

maybe

street car or racing.use

 

[lou]

stage 1-gn-1 heads t-d to

i have piston to

 

[EricB]

I have a 4.1 and 109 block now thanks to intercooled88

Well after a 11 drive From North Carolina to Western Massachusetts and half of that was in the snow ,I now have a 4.1 and a 109 block(Thank you Bob). The 4.1 is all ready at the machine shop and the 109 block is sitting in the corner of the shop.

 

[EricB]

Lou it will be a street/strip car.I'm Building a 4.1 just to see what they can take. Either it will stay together or I will count the parts and pieces under the car.

 

[lou]

can you use

iam getting out for now got steer the wrong way i got great set of gn -1 cnc new vale spring, and verything new just 200 miles on them and t-d 1.65 and a molex crank and cunningham rods pan oil system call me if you wont 847-878-9055 this is good parts someone sold a block that to thin to run big boost my builder sad noway a cant find a stage 2off center so i am sale everthing, thanks