Wanted: Stock Turbo

[tomcatturbo]

Hey All

Please let me know if you have a Stock Turbo. I'm looking for a stock TBL 348Garrett off an 86-87 in good condition.

Please let me know what you have, and how much. I'm looking for a good deal on one.

 

[chadly]

I have a stock turbo and waste gate off my 87 gn. It has roughly 90k miles on it. Worked great, held full boost when I removed it. If this is what you are looking for make me an offer.

Chad

 

[graza002]

I have a stock turbo...It has 5k miles on it, new center housing, balanced wheel. Does not smoke, held 21 lbs of boost. There is shaft play, (found out when I took the turbo off) front to rear. (poss bad rear seal) but no play right to left, housing is in great condition. Let me know what you think.

 

[tomcatturbo]

Got Turbo??

I don't know what to offer. I'm looking for an inexpensive, reliable, good used stocker turbo.

I'm looking for someone who will give me the "Best" deal! Also, if you give me a good deal, I promise to deal with you again in the future, if you have something I want, and Vice Versa. I'm a loyal buyer/seller.
:smile: :smile: :smile: :smile: :smile: :smile: :smile: :smile: :smile: :smile:
Please give me a number and tell me what you're looking for for a reliable, stock turbo with no shaft play, smoke, and spools nicely.

How Much?

PM me or email me at Ipodintampa@yahoo.com

 

[SCOOBY DOO]

I have a VERY low mile TA-49 with a polished inlet bell and housing and a recent new HD actuator...but it ain't gonna be cheap.

 

[gnmaster2004]

turbo

Got a low mile stock one from turbonetics $300

 

[notacarlo]

Hope you get what your looking for. I turned my stocker into a trailer hitch filler.

 

[tomcatturbo]

That was extremely funny! LOL! You made my day.

Hope you get what your looking for. I turned my stocker into a trailer hitch filler.

 

[notacarlo]

And here ya' go. :biggrin:

 

[tomcatturbo]

LMAO!!!! Holy Cowwww! I thought that you were just joking and that was funny enough. This picture nearly had me spit out my coffee here at work! This was great. Is this even real?? It looks like a really nice Turbo to be sitting on the back like that.... Photoshop?

I love the other pic of the guy standing next to the humongous Turbo with his foot on it.

:biggrin:

 

[notacarlo]

No, that's real. I overspun that thing a while ago. Couldn't find a use for it, soo the brain started churnin'.

I polished the compressor cover. The compressor wheel is held in by the backing plate welded to the 2"x2" tube to reciever. Then 4 bolts hold the compressor cover onto the backing plate. Took me about 20 minutes and some scrap steel in the shop.

glad you approve!:biggrin:

 

[GregInAtl]

I have a VERY low mile TA-49 with a polished inlet bell and housing and a recent new HD actuator...but it ain't gonna be cheap.

be more specific on $, also 82, or .63 ?

 

[ChavoLC2]

stock turbo

Have a stock turbo 175 shipped. obo. Just been sitting around. Actually my best friend ran it for awhile while his 54 was being fixed by PTE. Send me a pm if interested.Does have actuator.