Here is a recent comment by Salvage V6
Salvage:
Tall in the back normal in the front with 235/60/15 up front. (car appearence)
Section width measured 285mm which is 11.2 inches at the lower part of the tire where the weight bulge is. (275/60/15)
Had to use parallel straight edges along each sidewall to get the measurement. I think we have large calipers at work that may do the job better.
The 275/50/15 measured 268mm which is 10.5" no bulge they were off the car.
Hope that helps a bit. Will try to get a better measurement of the midpoint if we have large jaw calipers available.
Sure do wish they fit better.
I am thinking they are a half inch taller as well? I could be wrong about that.