Well, I bit the bullet...

[fly89gta]

Just ordered my Extender Chip and the MAF and Spark wire extenders.

Hopefully this will solve my running rich problem.

I forgot to ask Kevin what pressure to set my fuel at. I'm sure I'll get all that in the box, with my combo should I start around 40#'s line off?

 

[DCVING 6]

I just got a Kirban's Billet AFRP, the insructions said to start at 42psi vac line off.

 

[fly89gta]

I see you have Trasher chips, i'm talking about the Extender Chip...

 

[DCVING 6]

DOH!
Sorry about that.

 

[fly89gta]

Originally posted by DCVING 6
DOH!
Sorry about that.

lol, that's ok

 

[sixgun86gn]

I believe the extender is supposed to be run at 45# line off.That is what I run and it is perfect in my car.

 

[U1ARUNIT]

Yes 45# is reccomended, but you can raise or lower it to center the BLMs if necessary and tune it with the Translator knobs.

 

[fly89gta]

this ought to be good, not used to tuning myself, i have my trasher chip which locks the BLM's@128 at idle, so i want 128 at idle, any other suggestions?

 

[U1ARUNIT]

Try it out first to see what ya got after driving the car for about 10-20 miles and get back to us.

Don't obsess about 128 idle BLMs.. as long as they are close(read, in range) you will be fine.