Well the verdict is in heres the destruction

[Otto J]

If anyone can host the pics, i have some of what happens when you dont have enough fuel in your tank when running mid tens with 28#s of boost
I need a Piston, and the block deck cleaned
and some major repair on #1 cylinder on my champion aluminums.
If you can host the pics let me know
Otto

http://a7.cpimg.com/image/DB/E6/25251547-9677-02000155-.jpg

http://a8.cpimg.com/image/DC/E6/25251548-c802-02000155-.jpg

http://a9.cpimg.com/image/DD/E6/25251549-9ca8-02000155-.jpg

http://a0.cpimg.com/image/DE/E6/25251550-9c91-02000155-.jpg

http://a1.cpimg.com/image/DF/E6/25251551-ec62-02000155-.jpg

 

[Jack Evers]

Send them (the pictures) Otto, I'll get them attached to your post.

jevers1@cox.net

 

[Mease Performance]

otto

post those pics on webshots ( http://www.webshots.com )

takes about 1/2 hour for them to load, make SURE you post them in (my PUBLIC community page)

As far as the head goes, send it down here I'll weld it up, then you can take it to the local machine shop and have it decked (or we can deck it) or you can bring it here in person

hope that helps!

 

[turbosam6]

What happened dude? I thought the FAST adds the fuel if you come up a little lean? Or did you actually run out of fuel? That sucks. Hope you get it back together soon!

 

[Otto J]

Thanks Keith. I may take you up on that. But the wheels are in motion already and i have a 4 bolt stage 1 block,all it needs is a crank, So i think i will send the heads back to champion to get tehm repaired and converted to 14 bolt heads and may as well have the port and polish them too.But if that falls thru i may run down and have you weld them
THanks Otto
Is it something you cold do while im there? I dont mind waiting just dont want to have to make 2 trips from CT

 

[Otto J]

Originally posted by turbosam6
What happened dude? I thought the FAST adds the fuel if you come up a little lean? Or did you actually run out of fuel? That sucks. Hope you get it back together soon!

I believe it was because there was not enough fuel in the tank. Was a bit under half(if it reads right) and while i was making the pass it was reading WELL below empty. Im as Butthole, its purely my fault. was making fast rounds and didnt want to miss my elimination. But boy was i eliminated!

 

[Intercooler]

Sorry to hear that! Send them to my e-mail and I can have them up in minutes.

 

[Jack Evers]

Otto, that is UGLY.

 

[86brick]

Ouch!!!

 

[salvageV6]

Damm that sucks Otto, you just got the thing flying too.

Hope it goes back together quickly for ya.

 

[Mease Performance]

HOLY $HIT DUDE!!!!!!!

DAMN I've NEVER seen a head that bad?????????? HOLY COW!!!!!

Better get the 1/4" dia filler rod out for that one!!!!!

Head's gonna need to be bushed and a lil actually a LOT revamped to get her fixed!

Good luck man, DONT DO THAT AGAIN!!!!

 

[turboculosis]

Sorry to hear about your mishap.I had my own this weekend as well.Good luck in getting her back running,hope everything turns out well.

 

[Pronto]

Yikes! Well that gives you the excuse to go the a stage block...

 

[T-top87GN]

Re: HOLY $HIT DUDE!!!!!!!

Originally posted by Mease Performance
DAMN I've NEVER seen a head that bad?????????? HOLY COW!!!!!

Better get the 1/4" dia filler rod out for that one!!!!!

Head's gonna need to be bushed and a lil actually a LOT revamped to get her fixed!

Good luck man, DONT DO THAT AGAIN!!!!

Better get the 1" filler!!!

That is going to take hours and hours to weld that sucker back up right.

Yich. Not gonna be cheap.

Sorry to hear it happened!

 

[Mease Performance]

Otto

send that head down here I can get it fixed properly.......Or maybe you can find another GN1 burnt on a cylinder and cut it in half

shoot me an Email we can help ya out, that blocks gonna need to be decked!

 

[JDSfastGN]

wow that is crazy ive never seen a head go that bad. Good luck with it man

 

[LV GN]

copy cat!

 

[Otto J]

Len call me I have something you may need
Otto

 

[Russ Merritt]

Tell me that wasn't makin noise across the finish line! You better go see if the front tire's still there. That looks like the space shuttle o-ring disaster, only in Otto land! Sorry to see that man!

 

[Chuck Leeper]

????

FAST system?? Did you look at the data logs yet??
Dual in tank pumps?
What do the other cylinders look like??

If you have a FAST log, I'l like to see it, if I may.
Any pics of other cylinders?