badgrandntl
Member
- Joined
- May 12, 2004
- Messages
- 130
Just want to see what ou guys think it is worth, I am thinking about possible selling it, but don't know if I can justify loosing all that money I put into it.
Pics can be seen at
Putfile - Welcome to my homepage!
1985 GN with 87 motor
MOTOR
GT6131E Turbo
42.5 lb injectors
3" S.S. Keith Mease down pipe
Heated oxygen sensor
Walbro 340 hotwired fuel pump
RJC Powerplate
Razors Alky Kit (still have 40 gallons of Methanol)
3" S.S. ATR single shot exhaust
Ford Powerstroke intercooler
Direct Scan
LS1 Msss air Flow sensor + translator
Eric Marshall chip
Dual electric fans
INTERIOR
6 point roll cage to the frame
Corbeau Racing seats
5 point corbeau racing harness's
SUSPENSION-BRAKES-DRIVELINE
PST suspension complete front end
Corvette C5 front brake conversion
Metco rear lower control arms
Metco adjustable upper control arms
Bilstein shocks all around
Rebuilt rear end with moser axles and new stock gears an eaton posi
Poston frame braces
Hurst roll control
Rebuilt trans by Jimmy's
9.5" lockup vigalante 3200-3500 stall
BODY
New paint
Fiberglass front and rear bumpers
FIber glass bumper fillers
Simmons 3 piece wheels
SPARE PARTS
Stock Brake setup
6 spaire 85 GN rims
2 have brand new mickey Thompson never used slicks
Lots of other little spare parts
Instant center relocation Brackets
Driveshaft loop
The AC and heat is gone and has a S.S. block off plate
THe car did a best of 11.6xx at 119.xx and I have the slip and that was with drag radials
Everything has between including engine which was a stock rebuild 1000 -9000 miles
The body has 90,000 some miles
PIcs can be seen at
Putfile - Welcome to my homepage!
Pics can be seen at
Putfile - Welcome to my homepage!
1985 GN with 87 motor
MOTOR
GT6131E Turbo
42.5 lb injectors
3" S.S. Keith Mease down pipe
Heated oxygen sensor
Walbro 340 hotwired fuel pump
RJC Powerplate
Razors Alky Kit (still have 40 gallons of Methanol)
3" S.S. ATR single shot exhaust
Ford Powerstroke intercooler
Direct Scan
LS1 Msss air Flow sensor + translator
Eric Marshall chip
Dual electric fans
INTERIOR
6 point roll cage to the frame
Corbeau Racing seats
5 point corbeau racing harness's
SUSPENSION-BRAKES-DRIVELINE
PST suspension complete front end
Corvette C5 front brake conversion
Metco rear lower control arms
Metco adjustable upper control arms
Bilstein shocks all around
Rebuilt rear end with moser axles and new stock gears an eaton posi
Poston frame braces
Hurst roll control
Rebuilt trans by Jimmy's
9.5" lockup vigalante 3200-3500 stall
BODY
New paint
Fiberglass front and rear bumpers
FIber glass bumper fillers
Simmons 3 piece wheels
SPARE PARTS
Stock Brake setup
6 spaire 85 GN rims
2 have brand new mickey Thompson never used slicks
Lots of other little spare parts
Instant center relocation Brackets
Driveshaft loop
The AC and heat is gone and has a S.S. block off plate
THe car did a best of 11.6xx at 119.xx and I have the slip and that was with drag radials
Everything has between including engine which was a stock rebuild 1000 -9000 miles
The body has 90,000 some miles
PIcs can be seen at
Putfile - Welcome to my homepage!