When do you go to a fast xfi system??

[TURBOPOWERED68]

From OE to XFI what does it cost?

I have spent $550.00 on chips
and with my new injectors have another $200.00 to go.
Every time i make a change it requires a new chip and thats another $100.00
And since i will never leave things alone i might as well change directions
what do you guys think?

 

[turbogn_231]

$1900 special from Cal this week and an hour of your time.

Posted from the TurboBuick.Com mobile app

 

[TURBOPOWERED68]

$1900 special from Cal this week and an hour of your time.

Posted from the TurboBuick.Com mobile app

What else is needed for the installation besides someone that knows how to tune it?

 

[kidglok]

What else is needed for the installation besides someone that knows how to tune it?

That's pretty much it.


Posted from the TurboBuick.Com mobile app

 

[turbogn_231]

And Cal will set you up with a basic tune to get going.

Posted from the TurboBuick.Com mobile app

 

[Grumpy]

And Call will set you up with a basic tune to get going.

Call Cal !!! Sell off your other stuff an use that towards it. Plus your $200 that your goin to spend for new chips.

 

[kidglok]

From OE to XFI what does it cost?

I have spent $550.00 on chips
and with my new injectors have another $200.00 to go.
Every time i make a change it requires a new chip and thats another $100.00
And since i will never leave things alone i might as well change directions
what do you guys think?

dont forget you can recoup some money by selling your "chip" stuff, no need for a MAF, translator, powerlogger, chips, etc. If you are serious about it, go to www.fuelairspark.com to downoad the software and start fingering (giggity) thru it to get yourself familiar with the parameters.

 

[TURBOPOWERED68]

dont forget you can recoup some money by selling your "chip" stuff, no need for a MAF, translator, powerlogger, chips, etc. If you are serious about it, go to www.fuelairspark.com to downoad the software and start fingering (giggity) thru it to get yourself familiar with the parameters.

These cheap Buick guys want shit for free including shipping.
I can give in to my inner hoarder and let that junk sit in the basement and then put it the garbage 20 years from now

 

[TURBOPOWERED68]

I would keep the Scanmaster If it would work with the XFI
1-Scanmaster ?? $225.00 plus shipping ----- ill get a $25.00 offer including PP and shipping if i am lucky
1-Stock working MAF ?? $$ What do these bring in?
1-PowerLogger ?? $$225.00 plus shipping ----- ill get a $25.00 offer including PP and shipping if i am lucky
1-Stock ECM ??
What else is not needed and can get sold?
by the looks of the above list i am way short on money for the XFI.

 

[pacecarta]

,

 

[TURBOPOWERED68]

yep , if its on sale for 1900 and you sell all your stuff youll only need to come up with 2500

This is exactly what i am talking about.

 

[kidglok]

yep , if its on sale for 1900 and you sell all your stuff and ship them out to the four corners of the earth at your expense youll only need to come up with 2500

The earth has corners? I thought It was round


Posted from the TurboBuick.Com mobile app

 

[pacecarta]

i

 

[TurboBuRick]

LOL!

 

[seeya v6]

You can get a used classic FAST for $800 or so...that will get the job done!

 

[TURBOPOWERED68]

You can get a used classic FAST for $800 or so...that will get the job done!

That sounds way better.
Is there much of a difference between the two?

i do know of at least one nut case currently using classic fast, he thinks he's a comedian too
Now who can lend me $800.00

 

[TURBOPOWERED68]

Does the Scanmaster work with F.A.S.T ?

 

[TurboDave]

There is a special Scanmaster built especially for the Fast XFI

 

[TURBOPOWERED68]

There is a special Scanmaster built especially for the Fast XFI

Is it an update that can be installed onto mines? or a whole new unit ?

 

[TurboBuRick]

Both chip guys will make changes if you send it back. Why do you keep buying new ones?

Food for thought. I would never buy a used fast or fast classic without a clean bill of health from fast.

Rick