Where does MAP connect

[DailyDrifter]

got my new XFI today, my question is where does the map go. Do i just run a vacuum line inside the car to the caspers ecu adapter? Thanks for now, I will probably have more questions later

 

[DailyDrifter]

I got it

 

[Boost231]

what was the answer. please share for future people.

 

[turbojimmy]

what was the answer. please share for future people.

The Casper's adapter has a short 'pigtail' coming off of it for the MAP sensor. The instructions say to mount the MAP inside (within reach of the connector) and bring the vacuum in to it.

I put my MAP under the hood in what would have been the stock location (passenger side fender, but I didn't have a MAP because I have a digital dash) and used Casper's adapter to tap into the harness behind the glovebox.

When I first installed FAST I just hard wired the MAP to the connector on Casper's adapter using taps. It wasn't elegant, but it was functional.

Jim

 

[DailyDrifter]

what jimmy said, i'm just gonna "t" into my stock map and run it inside the car

 

[TurboDave]

what jimmy said, i'm just gonna "t" into my stock map and run it inside the car

Your stock MAP is only a 2bar (15psi boost). I doubt that will suffice. You'll need a 3 bar.

 

[DailyDrifter]

I'm gonna tee a vacuum line off the stock map and run that to the new 3 bar inside the car.