Which plug wires?

[WH1]

I just changed my plugs and need some new wires. I was thinking of MSD 8.5's or Accel 8.8's. Any suggestions and part numbers if you've got them?

 

[TurboRegal84]

I have always just used AC Delco wires, or a Parts store wire.


Just with Hot-Airs if you run a bare wire over on the passenger side you need to be VERY careful! I always wrap my wires in some high heat loom so they dont get burnt by the up or down pipes.....It sucks when your chasing a cly mis and it turns out that you were the cause of it!

 

[84wh1]

Accel 8.8 are great. Mine almost aleways touch the downpipe, and they have never melted. There heat resistant to a certain temperature, but i'm not sure what exactly. I would go with those if I were you.

 

[TType84]

Yes!

MSD or Accel.

MAGNECORE SUCKS.

I have heard really good things about nology wires, but ive also heard they are REALLY expensive..

 

[fc227]

If you want the best use Moroso ultra 40 or Blue Max 800 ohm.

I have tested them all . Moroso has the highest dielectric strengh , very good power transfer and low EMI/RFI.

On the Ultra 40 we have high temp plug boot(s) and a silicone jacket that is very heat resistant

the Blue Max offers the same thing.

 

[TT276stg2]

My favs are the Taylor "409" wires. The big fat ones, extra heat protection.
jay

 

[KWIKR 1]

Do the Taylor 409's come in a straight boot . I wanted to get the Thundervolts but they only come in a 90 boot.