Who Wants To Run 10's ?

[BAGN]

10 Sec. Grand National Motor For Sale

MOTOR IS COMPLETE AND IN RUNNING CONDITION (Race Ready/Show Quality)

Does Not Come With A/C Compressor , Alt or Power Steering Pump & Bracket

Stock Block w/.030 TRW Forged Pistons
Stock Crank STD/STD
Stock Rods Recondition w/ARP Rod Bolts
Race H-Bearings on Rods & Mains
Motor Has Been Balanced & Blue Printed
Decked , Squared , Line Honed , Bored w/Torque Plate
Conley's Hydraulic CC-1 Cam & Lifters
Double Roller Timing Chain
High Volume Front Cover w/H.D. Oil Pump
M&A Full Race Ported Heads w/Wire Lock Head Gaskets
Powder Coated Valve Covers & Turbo
ARP Head Bolts
Stock Race Ported Intake w/70mm Throttle Body & Bonnet
ATR Stainless Steel Headers
ATR 3in Stainless Steel DownPipe (Jet-Hot Coated Black)
Turbonetics RACEGATE
Limit Eng. TE-45A Turbo
CPP Stretched Intercooler & 1/2 w/ 3/4 Cold Box & Dutt. neck
72 lbs Injectors w/Modified Fuel rail For 2nd Fuel Line
Adj. Fuel Pressure Reg.

Motor Has All Sensors & Is In good Running Condition , Has Less then 3000 miles on it.

Leak down is less then 5 % (COLD) on all cylinders.

THIS MOTOR RAN 10.70's @ Over 123 MPH at only 17 lbs of boost in a 3550 lbs Car - Over 525 H.P.

Would Take Over $12,000 To Build

$6800 CASH Gets Everything

 

[G McCall]

Good price if all is well. No way to build the motor for that.

10.70s with only 17lbs of boost is amazing with that combo. Good 60fts I'll bet ? No lock convertor might result in the 1/4 mile 123 mph area, for those doubtful minds.

 

[Wheeler]

Have you sold the motor yet ?

 

[BAGN]

Sale is pending

SALE IS PENDING.

STAGE II HERE I COME! (Hopefully)

2nd Child due in late December.

Hope the wife understands I gotta put my priorities in order. HAHA

It will be a slow process, but i gotta gett'er done.

Keep your fingers crossed. (on a Healthy baby
& a Healthy Stage II)

 

[iamjeff]

*fingers crossed*

 

[BAGN]

MOTOR IS SOLD !!!

MOTOR IS SOLD !!!

Stage II here I come

 

[Chris McDade]

I can't beleive your parting from us 109 guy's. Where going to miss you

 

[BAGN]

Originally posted by Chris McDade
I can't beleive your parting from us 109 guy's. Where going to miss you

It's something I had to do.I didn't want to hurt a good motor by trying to run too much boost to it.(with no caps or girdle) Thats why i'm going Stage II.

I got my Stage II the other day and its in need of some T.L.C.

I just hope I can afford that type T.L.C.

 

[Chris McDade]

I will have to come by and check out the new motor.