Will a 6766 Ball Bearing Precison work?

[mightymouse41]

Looking to replace a TE63. Will the stall be good and the setup? I really wouldn’t want any turbo because I plan to build another engine later on and don’t want to keep buying turbos. Thanks

 

[Mr.Spool]

You can physically put anything on the car what are you looking to do?
3000 stall on an old 67 turbo is going to be lame

 

[mightymouse41]

You can physically put anything on the car what are you looking to do?
3000 stall on an old 67 turbo is going to be lame

Even a Dual Ball bearing 6766 Precision? Maybe 1/8 mile. Time estimates with it?

 

[Mr.Spool]

Again what are looking to do?

 

[Mr.Spool]

Footbraking a gen 1 67 off 3000rpm isn't the way to a fast pass

 

[mightymouse41]

Footbraking a gen 1 67 off 3000rpm isn't the way to a fast pass

Again what are looking to do?

95% of the time is just cruise in the car. The TE63 is getting tired and it’s at 25 lbs of boost. Thanks for your help.

 

[Mr.Spool]

Get yourself something new and properly sized and have fun

 

[mightymouse41]

Get yourself something new and properly sized and have fun

Thank you again!

 

[GNVYUS 1]

By the time you get to the next engine, they might be on Garrett Series 3 (G35-1050) a 62/62 making 1050hp or Spools Hubless Comp the same. LOL
These are gonna help us be like an EV, instant Tq.

The new turbos spool way faster and make more power and obliterate the older tech, my TA49 (58/56) vs Series 1 G30-770 (58/55) got smashed by almost 250wtq. (697tq vs 456tq). TA was maxed psi vs G30 with a couple left in it and less timing.