will adding gnx bushing bend my quarter panels?

[greeneyegi]

i started the complete bushing replace last night,noticed while gnx bushings installed it causes all others to not rest flat.if i tighten down will it try to buckle my quarter panels?dont need another job added too list of fixes i have already planned..
also does the top nipple have to fit in body?i noticed 2 sets of holes ?wich ones to line up?

 

[hemi8]

Yes it will, trim the GNX bushing till the body lays flat on the frame. My driver's side is still not right because of this, just cut it down and you'll be fine.
Mike

 

[Chuck Leeper]

I had no problems with the several sets I've installed............

 

[G NASTY]

Is there a spot on the body for them to fit into? Is there a difference between the stock ones and the poly ones?

 

[SIXBANGR]

Is there a spot on the body for them to fit into? Is there a difference between the stock ones and the poly ones?

yes, there is a spot for them. yes, there is a diff. The poly will give you a stiffer ride. I took mine out and put stock ones back in.

 

[Grumpy]

I had no problems with the several sets I've installed............

put a lot in over the years.. never had any problems like the "other" older gentleman here

 

[tonysmach]

I installed th GNX bushings (rubber not poly) about 3 weeks ago and had no issues. As long as it goes in the hole in the frame you are fine. The top little nipple did not line up to teh hole in the body but it seems fine. I have not driven the car yet due to winter here in MI.