Window motor replacement

[TUG_87GN]

I need to replace the drivers side window motor on my 83 T-type. Does anyone know what size hardware to use in place of the 4 rivits that will need to be drilled out. Also is there a source for the nylon rollers in the regulator assembly. I think some of them have gone bad contributing to the motor failure.

TIA

Greg
87 GN
83 T-Type

 

[Morbid]

I just had my motor done on the passenger side.

While watching the mechanic do it, he replaced the rivits with screws.

I suppose you could put rivits back if you wanted to.

I've been trying to restore my car the last two years by doing bodywork/fresh coat of paint and replacing old/worn parts.

Finding NOS parts even from the dealer is in some cases impossible for our years and make but you could give it a shot or try ACDELCO's website.


Greg Y

 

[Ttype83]

Originally posted by TUG_87GN
Does anyone know what size hardware to use in place of the 4 rivits that will need to be drilled out. Also is there a source for the nylon rollers in the regulator assembly.

TIA

Greg
87 GN
83 T-Type

Not sure of what screw size you need,but if you use the drill to size the hole you should be able to find the screw size from there.

HTH
Jim