Window tint

[tbone87]

What is the best to remove . Thanks
Posted from the TurboBuick.Com mobile app

 

[John Larkin]

Hairdryer to get it a little warm. Then a straight edge razor blade to get it started at an edge. Then just basically pull it off. The hairdryer can be used again to soften it when it starts feeling brittle.

Cleanup with Windex afterward. Oh yeah, it doesn't smell pretty while removing.

 

[tbone87]

Thanks i did that just took 3 hours lol the adhesive was pretty easy with paint thinner but had 2 layers one sense 87 just 2 windows.
Posted from the TurboBuick.Com mobile app

 

[aminga]

Ammonia and a dark trashbag. leave it in the sun for a while

 

[tbone87]

I will do that on the others thanks

Posted from the TurboBuick.Com mobile app

 

[Dreamn4GN]

I left it in the sun for a bit used a razor on the harder parts. Windex and a razor to get the glue off


Posted from the TurboBuick.Com mobile app

 

[tbone87]

If anyone wants to no paint thinner wiped the glue right off. But haven't got to the others yet

 

[Red C5]

I never liked using paint thinner in the car. I would just peel the tint then mix some dish soap like palmolive with water in a spray bottle. Spray the window down on the glue side and use a razor while it was soapy and wet. Could do a side window in just a couple of minutes without using harsh chemicals.

Peter

 

[tbone87]

I failed to mention this is a little import lol just to resell a little 300zx 87 model 3.0

 

[tbone87]

Will do thanks again!!!