would like to drive car instead of just look at it. have questions

[XXCMAN31]

1. Got CPT-60 TURBO on now but what’s the boost range of this turbo.

2. What’s the range of boost for the stock motor?

3. how do I set a boost gauge on the vacuum line and which one. Pictures please.

4. Got car running now 15min and cuts off, plus bogging out under excel. Thinking fuel filter or timing?

5. Is there an inline filter or just the intake one.

Thank you. I know is a lot of question but my book falls short on answers. any and all help is very much appreciated.

 

[TURBOPOWERED68]

1. Got CPT-60 TURBO on now but what’s the boost range of this turbo.

2. What’s the range of boost for the stock motor?

3. how do I set a boost gauge on the vacuum line and which one. Pictures please.

4. Got car running now 15min and cuts off, plus bogging out under excel. Thinking fuel filter or timing?

5. Is there an inline filter or just the intake one.

Thank you. I know is a lot of question but my book falls short on answers. any and all help is very much appreciated.

1-i can't help
2-with no KR and alky 20+
3-i connected mines at the MAP sensor.
4-i can't help
5-what are you talking about Fuel - AIR

 

[Underboost]

I drilled and tapped into my plenum for the boost gauge and Alky.

Fuel filter is in the frame rail behind the drivers door can't miss it.

 

[Chuck Leeper]

Maybe, read up on the "innerworkings" of the car, B4 you drive over the crank??
Or, find someone locally that can walk you thru a "lesson or 2" on working on such?
Here's a start:
Vortex Turbo Buick Performance
And:
Turbo Regal Web Site

Good reading, w/ lots of "how to's".

HTH,