WTB: LS1MAF (3.5") and Translator

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

KEVINS

Post count: 24,375
Joined
May 24, 2001
Messages
2,991
Want to barter for UCA suspension components?

I'm looking for a nice, clean LS1 (3.5") MAF and translator setup (a 3" chrome MAF pipe would also be really great) for trade for one of my GN UCA Bucket kits that you can see here:

http://baselinesuspensions.com/kits/chevy.htm

The standard bucket kit uses solid bushings on the chassis side but I can make some custom arms with poly bushings if you want which will take a few extra days.

I don't know much about the translators at this time but if they have two different versions I only need something simple so that I can run the LS1 MAF. I don't care much about tuning it. Just plug-n-play for me.

KS
 
You want the basic translator then. It's does has the ability to richen/lean fuel at base and at WOT but other than that it's just a box that converts old MAF wiring to new MAF wiring. And the fueling can be controlled with the chip and/or fuel pressure.

David Husek has a couple of translators for sale and I think he's got a good used one he keeps around for testing.

I do have a tested and working LS1 3.5" if you're not holding out for a package deal. $80 shipped.
 
Not interested in a trade but would sell my Translator Plus and 3-1/2 maf.....Pm me if interested
 
You want the basic translator then. It's does has the ability to richen/lean fuel at base and at WOT but other than that it's just a box that converts old MAF wiring to new MAF wiring. And the fueling can be controlled with the chip and/or fuel pressure.

Yea, it looks like this is what I want: a standard Translator. I've spent enough cash lately I hope I can just trade for the parts..

KS
 
Back
Top