wtb o-ring and spacer for fuel pressure regulator

[hemi]

alright guys i got the pump and tank in all hooked up. i had to put everything back together and might be missing some special o ring or washer/ spacer for my 87 gn. its leaking around the regulator, i have a stock regulator. i know i need to up grade to adjustable but just trying to get it running for now so help would be nice. thanks everyone.

 

[FLAT BOOSTED]

Did you take it off and check the o ring? Or did you try and tighten it down more? If the o ring is cracked then obviously thats it. If not then try and removed it and clean the seal area and o ring and put a little vasaline on the o ring or the new o ring before you reinstall it.

 

[hemi]

Is there any tight of spacer that goes on the regulator before the o ring ?

 

[FLAT BOOSTED]

not that Im aware of.

 

[Phoneguy]

Autozone and Advance carry the O rings made by FelPro.
I have an adjustable you can have cheap, I just bought a billet at the TB.com event.

Bryan

 

[hemi]

The o ring kit for the injectors is the same as the regulator?

 

[FLAT BOOSTED]

The o ring kit for the injectors is the same as the regulator?

It might be but you would have to check size. Off the top of my head....they seem similar in size but most likely not.

 

[hemi]

Cool. Phone guy let me know how much . Flat boosted thanks for the help.

 

[FLAT BOOSTED]

No problem hemi. I also have a few fp regulators if that deal falls thru. 1 is brand new nos bosch 237 which has higher fuel pressure than stock. Glad to help

 

[CliffyC]

Recommend you just get the Bosch 237. They're set at 43 psi. No adjusting necessary.

 

[FLAT BOOSTED]

^^I agree^^

Thats what I have...an nos one and a very nice used one. We can swap for your valve covers and upper plenum maybe