WTB off center 4.1 stage II long block or......

[3.8vsix]

Looking for a offcenter 4.1 stage 2 long block with GN1 alum heads or TA performace heads and roller cam. Motor needs to be in good running condition. I would consider a 109 with with girdle and forged crank and rods, and alum heads, with roller cam. If you are coming to the nats that would be a big plus!! Thanks!!

 

[3.8vsix]

To the top

 

[al shapiro]

engine

I know that it isn't exactly what your looking for but I have a 109 block with billet center caps, stock crank and a hyd. flat tappet 210/205 cam. The heads are ported iron heads with 1.77 int valves and 1.5 exh valves. Engine has roller rockers and zero miles on fresh rebuild. If interested let me know. Thanks, Al

 

[49-blues]

Not sure either- I have a fresh rebuilt RPE 6109 block balanced, 212/212 comp roller cam, RJC deep oil pan with oil sump pick up- if needed, Diamond .020 pistons, Billet center caps, brand new front cover, brand new HO water pump,all stainless bolts on front cover, Cometic gaskets and all ARP suds throughout, brand new GN-1 heads with Scorpion roller rockers,M&A valve covers,stock crank/ stock rods,$7500. firm-will help out with deliver-if close enough for free. I need to finish my stage2 block.Rpe paperwork comes with motor-shop work cost $4200. With a considerable deposit i would deliver to NC.

 

[3.8vsix]

Thanks guys for postin!! but not quite what I am looking for.