WTB or trade AC components/delete pulley

[imjoesnuffy]

I need the AC setup for an 86/87 car. I dont need the accumulator. Just the compressor and the lines.

Or I need a delete pulley.

I need an up-pipe, from the intercooler to the TB. Not drilled for alcohol. I have one drilled for alcohol if you are interested in trading.

I have lots of motor parts to trade
I have seven 8445 heads, 2 of which I just pulled off of my motor, most need to be cleaned up
NA crank STD/STD, could use a polish but its fine
87 coil and ignition used
new 87 coil
new CCCI adaptor for going from hot air to 87 setup
new coil base plate adaptor
Hot air intake stock
Sixteen connecting rods
5 hypereutectic pistons for 40 over
12 STD stock pistons need to be cleaned up
Accufab Adj FPR
RJC plate
Lots of little odds and end pieces for engine, mostly off of an 85 motor.

 

[Intercooled88s]

I have an 87 AC compressor that I would trade for the Accufab Adj FPR. If interested e mail me direct at Fortune628@aol.com

 

[nailheadpowered]

i have a complete a/c setup i removed from a 87gn that we can talk about call me at 818-913-2800 mike. would be interested in the new coil if its the module and coil for 87. nailheadpoweredgs@sbcglobal.net

 

[imjoesnuffy]

still need the compressor and lines and any associated bracketry