WTB Solid Roller Cam

[Jay Wicks]

Looking for solid roller cam, 218-224ish @.050 for stock, Champion, T/A style heads. Need cam only.

 

[fuzzyGN]

I have a 224-224 solid but I need bigger. I am building an N/A motor and I don't think this cam is going to cut it. If you have a line on something bigger, maybe we can work a trade/deal.

 

[Jay Wicks]

Eric, can you pm me the cam card or specs on your roller? Also, what type of nose is on it? Unfortunately, I do not have a cam for trade, so it would have to be an outright sale. Thanks.

 

[fuzzyGN]

I wasn't really looking to sell this cam until I have one to replace it with. I could use this one but I don't think it will be optimum for my set-up. If you get a lead on a bigger one I can buy then let me know. I really can't sell this one with out plan B in place.

Anyone have a big N/A solid roller for sale?

 

[Reginald West]

I have a stock style ductile iron 242 @.50 roller.

 

[Geoff87]

If your thread starts with:

WTB....

Want to buy.....

Wanted....

I'm looking for....

In search of....

Need a.....


PLEASE POST IN THE "Parts Wanted" SECTION!

Thank you in advance for your cooperation!

 

[ttypewhite]

I have a 224/224 solid roller. Pm me if your interested.

 

[Jay Wicks]

Eric, thanks anyhow, keep me in mind if you find another cam.

Reggie, sounds like a nice cam, but too big for what I want.

Geoff, sorry bout that, realized that I put it in the wrong section, just after I posted. Feel free to move it if you would like. Thank You.

 

[fuzzyGN]

I have a stock style ductile iron 242 @.50 roller.

Can you give the specs on this cam? Might be about right for my application. What is the retention system used on this cam?

 

[49-blues]

I have a high lift busch roller stage2 cam from a NA S2 motor- its oddfire- i heard it can be cut down to a evenfire roller.

 

[Jay Wicks]

I have a high lift busch roller stage2 cam from a NA S2 motor- its oddfire- i heard it can be cut down to a evenfire roller.

Sorry, Your cam is for stage II head valve placement, I need one for stock, or Champion style heads. Also, most Busch cams were ground on a 106LSA.

 

[gnxtc2]

I have a billet hyd roller 224/224 that I ran with solid rollers. Let me know if your interested.

Billy T.
gnxtc2@aol.com