WTB Stage II headers

[999T]

Single turbo or dual turbo. Please send PM. Thank you. Best regards.

 

[hemi8]

If you were so inclined:
Header flanges for stage 2 or stock-type ports can be found at SPD exhaust.
Design your own headers using:

https://www.trick-tools.com/Icengineworks-Exhaust-Header-Modeling-Systems-864

If you don't want to weld them yourself, send your snap-together model of each side to these guys and they will weld you a set:

Stainless Headers Mfg, Inc.

www.stainlessheaders.com

Mike

 

[999T]

Hemi8,
Thanks. That could work out. I had thought about buying the flanges and modifying some ATR stock headers, but I’m not that skilled in fabrication.

 

[hemi8]

Stainless headers, give them a call, they can send you mock-up pieces so you can design something that works, lock it in place and send the mock-ups to them and they will build the headers. I have had this done for my downpipes a few years ago and it worked out great. They were very reasonable in price as well. The pass. side of the ATRs is a complete POS, driver's side is ok but the flanges are waay too thin. SPD has the flanges you need.

Mike

 

[N2BUICK]

If your thinking about building a set these might be a start. Cut the piping off and use the flanges.
I could cut off excess pipe to help on freight.
$200 plus shipping