I need a set of stage II rods! Call me at 937-609-7146 or email me at xeniacandj@hotmail.com and let me know what you got.
Thanks,
Chris
Thanks,
Chris
WTB stage II rods
- Thread starter LCA1971
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- May 27, 2001
- Messages
- 10,866
LCA1971 said:
I have a set of Oliver 6.5 inch untis in my garage.
Mike Licht
I was here first
- Joined
- May 23, 2001
- Messages
- 4,642
ON or off center, wide or narrow journal. I have a few sets
Mike
Mike
- Joined
- May 27, 2001
- Messages
- 10,866
LCA1971 said:
Sorry I guess I am too long!
49-blues said:
With a pair of 8" dial calipers measure the big end bore inside diameter, then measure the wristpin bore inside diameter, write the diameters down. Then measure the length from the bottom of the wristpin bore down to the top of the big end bore, write down the length. Divide the wristpin bore by 2 write it down. Divide the big end bore by 2, again write this number down. Add the length plus the two divided bore diameters together and that will give you the total center to center length
example: Stock buick rod wristpin bore = .940 divided by 2 = 470
Stock big end bore = 2.250 divided by 2 = 1.125
Length from bottom of pin bore to top of big end bore = 4.365
Add .470 + 1.125 + 4.365 = 5.960
Similar threads
