- Joined
- Apr 4, 2002
- Messages
- 6,482
That's great!
Then there's NO excuse why we wont see it driven to the Bates show on Sun.
Mike Barnard
Update:
The rods should be in today and according to Kenny the CP pistons will be in by the end of the week.
The heads are done.
The crank was completed a couple of weeks ago. It cleaned up at .010" undersize. I also had it lightened and heat treated.
The Champion intake has been converted over to bolt on the engine.
Precision has checked out the turbo and it is being shipped back.
So we need to get the block machined and the rotating assembly balanced.
Jeff
Then there's NO excuse why we wont see it driven to the Bates show on Sun.
Mike Barnard