Recent content by foxbody95
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
-
Tuning help IL
Also looking forward was going to go 6.1 wideband chip when I knew what injector size I’d be ending up with but was wondering if the SD chips are still available? I can’t find them and thought it would be most efficient to convert to a map sensor and ditch the stock maf.- foxbody95
- Post #62
- Forum: Mid West Area
-
Tuning help IL
Thank you for looking at the logs for me, You did say the pump could be an issue. I was just going off what Eric originally told me that the 340 is adequate for 80 lbs. I just thought the fuel pressure rise was close enough I was seeing almost a 1:1 rise. will a walbro 450 be a sufficient jump...- foxbody95
- Post #61
- Forum: Mid West Area
-
Tuning help IL
is this real or false knock this run i matted it from a roll and it just burned the tires. also shouldn't my afr be in the 10-11? seems like it wants to constantly stay in the mid 12's?- foxbody95
- Post #53
- Forum: Mid West Area
-
-
-
Tuning help IL
ok so i finally got to get on the highway and do some logs if anyone would like to take a look at them i greatly appreciate the help!- foxbody95
- Post #50
- Forum: Mid West Area
-
Tuning help IL
Thanks for all the input, I do have a thermal gun I’ll hit the headers with it tomorrow don’t know if I’ll get much at idle. I will definitely pull the injectors and have them flowed and cleaned this winter. I took the car to some Buick guys and they drove it, said it was false knock but I just...- foxbody95
- Post #47
- Forum: Mid West Area
-
Tuning help IL
Well you were right the tr6 didn’t change anything. I did replace to non projected Ngk plugs and verified I have good power and ground at the knock module.- foxbody95
- Post #38
- Forum: Mid West Area
-
Tuning help IL
I will start pulling the connections to check for any corrosion I picked up a set of Ngk 4323 plugs the non projected tips, and ordered a baileys tr6 ignition system to rule out the ignition side.- foxbody95
- Post #36
- Forum: Mid West Area
-
Tuning help IL
I just richened it way up to rule out a lean knock that’s all I have it turned back down to base settings. The tr6 was just recommended by a bunch of gn guys, said it was the first move they’d make I don’t plan on using any of the functions just want the car to run clean. Thank you for the...- foxbody95
- Post #34
- Forum: Mid West Area
-
Tuning help IL
The shop I took it too really thought it was false knock aswell and recommend going through the wiring schematic for the esc module and all the powers and grounds, then upgrading to a tr6 to start- foxbody95
- Post #31
- Forum: Mid West Area
-
Tuning help IL
also when I was driving today a added almost all the fuel and it went to 9.6 afr gas scale I didn’t change it to the lambda scale- foxbody95
- Post #30
- Forum: Mid West Area
-
Tuning help IL
Ok will do, thank you for the help I will order a set of no projector plugs and try it, I was also recommended by a a shop by mean to just buy the tr6 ignition setup- foxbody95
- Post #29
- Forum: Mid West Area
-
Tuning help IL
- foxbody95
- Post #25
- Forum: Mid West Area
-
Tuning help IL
Not sure on the extended tips that’s what I was told to run in it when I bought the car, which was recommended for champion iron ported heads?- foxbody95
- Post #24
- Forum: Mid West Area
