009s

[turbogus]

hey guys i need you input ,whats the biggest turbo i can run with my 009s that i have. thanks

 

[blackmonte]

what are your goals and boost levels? Byan I think went low 11s on a TA-61 http://i103.photobucket.com/albums/m155/turbov6bryan/100_4658.jpg

 

[no-nos]

depends, i think a pt-51 or a ta-49 but i would ask cal hartline or jack cotton
or a vendor, cal and jack are really good, , cal help'd me pick-out my turbo and i could'nt be happier. 009's are good injectors which i have heard of them going into the 11's. I would buy a turbo i want not something that goes good with 009's . the worst would be that you max-out the injectors.
get some more feedback from the guys here. good luck

 

[galoush]

I had a CPT65 (Turbonetics ) From Cotton on my car in the past with 009s.... stock longblock , there is more involved than the turbo it depends on the rest of your combo along with said turbo and what boost levels your palnning to run , i ran the CPT65 up to 27-29 psi but i also ran it that high on C-16 only which is going to alow you to get leaner w/o problems

 

[turbogus]

thanks guys for your info.i am running stock intercooler with dut neck 3 inch downpipe with racegate stock t q fuel pump and all the small bolt on things i will run about 25 pounds of boost with c 16 .i want to know what turbo to buy with out changing injectors or t q .thnks again

 

[galoush]

Your running a stock fuel pump ? if so change that right away , what convertor are you runnning ? I think you said stock , I would look into one of the Ball bearing units im running a 6776 BB but i belive thats a bit big for your Conv .

 

[galoush]

Just taking a quick glance the GT6131e Ball bearing would prob work good withthe stock conv its bigger than a TE44 bb , id personally do a convertor and then buy one of the bigger turbos so you have some room to grow if you do more mods down the line which id assume you will .

 

[vacuum 6]

Alky or no alky? With alky 42 will be like ~50s. Some guys are going 120 mph thru the traps.