#1 (Core Support) Body Bushings

[autoteach]

Can anyone post some pictures to show how the #1 position body bushings should be installed between the core support and the frame. I have an 87 GN that I bought partly dissasembled in the front after a small collision, and is all straightened out and ready for reassembly. I have the stock GM style bushings from Gbody parts. Thanks!

 

[Mike E]

Here is the instruction sheet that comes with the Prothane poly bushing kit. The factory rubber bushings install the same way only the steel sleeves and some of the washers are integrated into the factory bushing.

 

[autoteach]

thanks Mike!

 

[grocerygetter]

and an fyi...if you are having issues getting these in right you may need to barely loosen the ones at the firewall and take the car up and down on the lift...the weight of the car on the nose (frame sag) will help line them up. One of mine were a hair tweaked.