10's with Alky control kit and single 340?

[Steve]

I am putting my WE4 together and I am curious if a single 340(hotwired of course) is enough to run high 10's with alcohol. My car is set up very similar to my last T-Type that ran 10.60's on race gas and no alky. I had a double pumper in that car but I would like to know how much of the total fuel load the alky will make up. Is 10.80/10.90's too much to ask of a single 340 and alky? Thanks

 

[ttypewhite]

Back in 94 I ran 10.70 @ 125mph with just a Walbro 340 intank pump, so I would say that it should not be a problem when mixed with Alky.

 

[Razor]

I run a single 6 year old 307... times in sig

Non-issue.

 

[matt87]

6.88 1/8th on a single 340, shouda be a 10 sec pass.

 

[daniel]

i ran 10.58 with a single 340

 

[insane6]

6.75 in the 1\8 and 340 hotwired

 

[Razor]

6.75 in the 1\8 and 340 hotwired

Attaboy.. lets see a 6.40

 

[insane6]

Attaboy.. lets see a 6.40

Once I get this dual nozzle setup figured out
Sprays alot more

 

[Steve]

Insane6, you and I have have a very similar combonation and I hope mine runs like yours. I saw in your post that you now have a dual nozzle set up so I assume you had a standard single nozzle system before? Razor, are you running a dual nozzle system also? Thanks

Steve

 

[Razor]

Razor, are you running a dual nozzle system also? Thanks

Steve

Yes. Once you can hit 100 in the 1/8, or 125 in the 1/4.. I step up the nozzles on my system.

 

[insane6]

Insane6, I assume you had a standard single nozzle system before? Thanks

Steve

Yes single on the 6.75 run

 

[insane6]

Insane6, I assume you had a standard single nozzle system before? Thanks

Steve

Yes single nozzle on the 6.75 run

 

[scot w.]

What kinda boost did you run to get that 6.75?

Yes single nozzle on the 6.75 run

 

[insane6]

24 #