153 tooth FP for 200R4

[turbox-tech]

Does anyone make the 153 tooth flexplate for our cars using the 200R4? our flexplate are 13 5/8" and the SB chevy is 11 7/16"...give or take
THanks in advance

 

[novaderrik]

why do you want a flexplate that's a different diameter? you'd never be able to find a starter that would work with it..

 

[turbox-tech]

why do you want a flexplate that's a different diameter? you'd never be able to find a starter that would work with it..

thats the thing...I have one of the Gbody mini starters and says for use with a 153 tooth, ours our 162 and the same starter elsewhere says use a 168. In a bind trying to figure this shit out. Stock starter has a 9 tooth gear and the mini is a 11 tooth
thx

 

[charlief1]

A 153 tooth flywheel is for an SBC but an SBC starter will bolt directly on our cars and work fine with a 162 tooth flywheel. Been there done that.

 

[turbox-tech]

A 153 tooth flywheel is for an SBC but an SBC starter will bolt directly on our cars and work fine with a 162 tooth flywheel. Been there done that.

spent some time tonight and figured this out!.., measure this, measure that and finally did a gear to gear check..thanks Charlie