1987 25.5 G/N roller

[Quick Turbo V6]

1987 Buick Grand National roller.
25.5 cage not certified. Weighed 3400 with a twin turbo V-6. Fiberglass hood & bumpers.
Set-up for Buick V-6.
Ladder bar with Afco double adjustable shocks.
Ford 9” fab rear-end, 40 spline gun drilled Strange axles. Wilwood rear disc.
Turbo 400 with a Griner brake, JW ultra bell BOP pattern. All the good parts installed.
Weldon 2025 pump & regulator. 10 gallon aluminum cell. Aeromotive fuel pump controller.
5 gallon water tank with Rule 3700 pump.
Autometer gauges, shift & oil lights.
MSD boost controller 7562 with co2 bottle.
2.5 gallon Peterson oil tank & breather.
Flaming river manual steering box.
Compition engineering 90/10 front shocks.
Center Line Convo Pro wheels. 275/60 M/T drag radials. Less than 10 passes.
To much more to list.
Car has been 1.3 60’. Goes straight.
Asking $18000. E-mail....quickturbov6@ameritech.net
Located in Michigan.

 

[Quick Turbo V6]

The Stage 2 motor (blown up) is still in the car. I will sell the car that way also. Drop your motor in and go racing. Stock ECM with a MAF-PRO set up.

Scott

 

[Quick Turbo V6]

Few more pics.

Scott

 

[Quick Turbo V6]

ttt

Scott

 

[Quick Turbo V6]

$20,000 and you can have the whole thing motor and all.

Scott

 

[2swoosh]

roller

Can somebody buy this complete roller and buy my S2 motor it will be bolt on:biggrin:

 

[Quick Turbo V6]

Can somebody buy this complete roller and buy my S2 motor it will be bolt on:biggrin:

That's a good plan :biggrin: I'll make anybody a deal if they do....lol

Scott

 

[2swoosh]

roller...

e-mail me here gauditec@yahoo.com for photos of the motor with brand new S2 block "off center" fully assembled with intake, GN 1 R fully ported heads,, etc....150 lbs injectors,twin turbos (60-1s) ,FAST,MSBC,th 400,chute,net,DS headers,intercooler (need repair). No race but licensing and tuning runs only before the accident, hence it was parted out. to fully complete the build it will need repair of the passenger side headers,your own intercooler, and a downpipe. Good names behind the build and tuning of this stout S2 motor.

 

[Quick Turbo V6]

$18000 for all of it. Or $16000 for just the roller.

Scott

 

[twistedwh1]

whats wrong with the motor? and whats the details on the motor? how fast did it go?

 

[Quick Turbo V6]

whats wrong with the motor? and whats the details on the motor? how fast did it go?

#1 rod wanted out so it made a new hole in the block. 274" C.I. Stage 2 with a pair of 63-1 turbos. 9.14@148 on E-85 with the stock ECM.

Scott

 

[twistedwh1]

Who did the work on the cage and suspension?

 

[Quick Turbo V6]

Who did the work on the cage and suspension?

Stenod performance did the cage. Here is a link to the pics of it. Stenod Performance Photo Gallery - Grand National 25.5 Roll Cage

Kenndy automotive did the rearend and suspension.

Scott

 

[Quick Turbo V6]

Sold.

Scott