2-3 slip prevention mods

[jimski]

im going to start rebuilding this bq trans. It went out with 2-3 slip under throttle.

Are there any mods that are a bulletproof fix for this terrible problem these units have.

Any help appreciated

 

[BEATAV8]

http://www.turbobuick.com/threads/3-2-control-valve-mod.322203/

 

[BEATAV8]

7 years later that trans is still working good

 

[Steve V]

Get the Bison pack. @bison

 

[jimski]

http://www.turbobuick.com/threads/3-2-control-valve-mod.322203/[/QUOTE

 

[TexasT]

Depending in how much power you plan to introduce to it you might get by with a "tight" direct clutch setup and a larger 2nd servo, along with larger boost, rev boost and the 700 spring.

If you plan on really beating on it a billet shaft forward drum and dual feeding the direct might be in order.

 

[ITSAV6]

Dual feed directs.