You can type here any text you want

200C length vs 200-4R

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

mrtpolson

Member
Joined
May 25, 2001
Messages
61
Is the 200-C transmission the same length as the 200-4R? I am planning to swap a 200-4R into an 85 Regal that now has the 200-C and want to anticipate the need to swap or shorten the driveshaft.
Thanks in advance,
tp
 
I believe the overall length is the same, but the mounting point is further back on a 2004r. You will need a 2004r crossmember.
 
Hope this helps.

tranny_dimensions.jpg
 
Yes

Yes they are the same lenght, the mounting points are different, you need a crossmember from a G-Body that had a 200r-4 and thats it. The driveshafts are the same lenght as well.


So what you going to do with the old 200c??
 
200-4R vs 200-C

I bought a G-force crossmember and plan to install a Rover/Buick aluminum V8 in the car eventually, unless my attention deficit kicks in (again.) I have the V8 parts except for a flexplate & an engine to trans adapter. What happens to the NA 3.8 and the 200-C? I have a few too many engines and transmissions in the garage now, so those will have to go somewhere else...wherever that is. The 200-4R is undergoing a minor rebuild right now.
Thanks for the info and interest.
tp
 
Back
Top