You can type here any text you want

2015 TAI Rules

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Sydwyndr

Admin
Staff member
Joined
May 25, 2001
Messages
3,547
I1. 109 block or equivalant such as production 4.1 (no stage / aluminum blocks)
2. Any 3 bolt turbo
3. Weight with driver 3450 (iron heads), 3550 (Aluminum heads)
4. Non inter-cooled cars are allowed the use of Ethanol blended fuels (No Racegas)
5. Must fill up with 10 gallons of 93 octane pump gas on race day before eliminations (Ethanol cars excluded)


You are eligible to vote on proposed changes if you have ran TAI in the past 3 years. All threads are open for discussion from anyone.

1. Jack D. (jdsgnx)
2. James B. (TurboTnZ06)
3. Clint A. (Sydwyndr)
4. Patrick B. (SloGN)
5. Bryan L. (Phoneguy)
6. Jamie W. (Turbo6x2)
7. Fred (Grey Racer)
8. Ross (Capt. Flash)
9. James K.
10. Randy Q.
11. John C.
12. Tim W.
13. Matt S.
14. Adam K.
15. William A.
16. We4Mateo
17. huntsg

More names will be added when i get a list of racers.
 
Last edited:
K I S S..... Keep It Super Simple.......;);););)

If you are considering joining, get ready for some SERIOUS LAUGHTER!!!!!
 
I thought it was 3 bolt up to 76mm? Although, the 3 bolt is the limiting factor, not the compressor.
 
I never heard of a 3 bolt bigger then 76....

Hybrids are fine as long as u make weigh
 
Go to the first page of each poll thread they r sticky's
 
Last edited:
I'm in, I'll be there for the first time this year....hopefully i'll be a bit faster before October
 
Back
Top