Luckydog32
Member
- Joined
- Sep 28, 2014
Car dies when I come to complete stop. I have 4 wires coming from the connector on the drivers side trans case. 2 go to the passenger front solenoid 1 goes to pressure switch on passenger side rear. The other one was not connected to anything and I cannot see anywhere it would connect to. So my question are
1 -would this cause my stalling issues ( car acts like it’s not going into neutral when it comes to a stop)
2- could my issue be my TCC solenoid stuck closed and not allowing pressure to be released causing torque converter to stay engaged (replacement solenoid on the way)
3- if a bad pump is the issue is it best to rebuild and how would I diagnose this.
4- if rebuild is in order who? I’m in north central Indiana and how much can I expect to pay.
Actually put miles on the car for the first time in 18 years drove and shifted fine for about 10 miles then this happened
1 -would this cause my stalling issues ( car acts like it’s not going into neutral when it comes to a stop)
2- could my issue be my TCC solenoid stuck closed and not allowing pressure to be released causing torque converter to stay engaged (replacement solenoid on the way)
3- if a bad pump is the issue is it best to rebuild and how would I diagnose this.
4- if rebuild is in order who? I’m in north central Indiana and how much can I expect to pay.
Actually put miles on the car for the first time in 18 years drove and shifted fine for about 10 miles then this happened