4340 stock stroke forged crank $375

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Steve

Well-Known Member
Joined
Jun 1, 2001
Messages
1,232
I would like to sell my 4340 stock stroke forged crank. I bought this crank used from a board member for my build but I have changed my plans for my build and no longer need it. The crank is standard now and I was told by the previous owner that it would polish and stay std/std but I have not had it to a machine shop to have it checked out. $375 plus shipping or might trade for a set of 60 or 80 pound injectors or possibly other items. thanks
 
Steve
I've got some 83# ijectors I'll trade toward the crank.
You mailbox is full.
later
 
Steve
I've got some 83# ijectors I'll trade toward the crank.
You mailbox is full.
later


Sorry about the inbox, I got it cleared out.

I should have specified in my add that I need the injectors to be high Z for use with a stock ECM, unless someone has a B2B FAST they want to work a deal on!
 
I had a few questions abou the brand of the crank. The previous owner said it was either and Eagle or a Cat, he could not remember for sure, but I think its a Cat because the knurling on the crank looks just like the knurling on the other crank I have that I know is a Cat. For those not familar with forged cranks as far as I know all of the forged cranks are forged at the same place then different companies buy them and finish machine them. Like I stated in my original post the previous owner said it would polish and stay standard but I have not had it to a machine shop to be sure. The crank could need to be turned .010/.010 I am not sure.
 
I went out to my shop get some pics and I found the part number on the crank and it definatly is a Cat crank.

IMG00292-20120106-14181.jpg
 
I just wanted to give an update on the crank. I have gotten many PM's on the crank and I am going to work thru them based on the time I recieved them so that I can be as fair as possible. Please be patient and I will update the thread as soon as I work thru the PM's. Thanks
 
if its available i would take it off your hands please, i may have some parts you would like such as very lightly used 60 pound siemans/mototrons high z injectors and ttweak chip, also may have other parts u may want, let me know what else u want and if i dont have it i can probably get it for u with a phone call or two
 
does this crank have the knurling on the rear main? cant tell on the pics
 
If interested I have available for trade either a Spohn rear drag sway bar or a Hurst Pistol grip Quarter stick with built-in line lock button, comes with modified center console for use with this shifter.
Mike
 
Back
Top