You can type here any text you want

4L60e?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
I was wondering the same thing myself.
4L60E...or any other late model electronic trans for that matter :confused:
 
I should have an answer for you tomorrow... I just picked up my 4l80e, which is very similar if not the same as the 4l60e bellhousing.
 
That's actually a good question. However, the 4L60E is essentially an updated (and renamed) 700R4. The 4L80E is a modern Turbo 400. I've seen the Sy/Ty guys use the 4L80E to replace thier 700R4's, but I know as an f-body owner, the 4L80E itself won't even fit in my car. At least that's what I've heard/read. As far as the 4L60E to an LC2, I don't know if anyone's ever tried it and I've never known anyone personally to bolt up a 4L60E to a turbo Regal. So I'd like to see the answer to this myself, actually..
 
read this: http://www.turbobuick.com/forums/pe...s/245418-buick-s-c-obdii-ecm-turbo-3-8-a.html


I know for a fact the 4L60E will fit in the G-body tunnel. I have install a 1995 chevy 350 throttle body injection (OBDI) into the 85 regal. If the 700r4 has the same bellhousing has the 200r4. Then I believe the 4L60E might fit. I know the 4L60E can be beef-up to take 1000+HP. I had this transmission in my 1996 chevy impalla ss T-60 intercool (890hp). I kill the stock trans a 500hp, rebuild will five gear plantary billet servo, 700r4 bands SELECT 9" torque convertor and more.

So once I get a YES. I will proceed with my purchase and installation.

thank you guy.
 
Chevy only bolt pattern, unless you are willing to cut off the housing & use a JW super bell or an adapter.
 
400 turbo and gear vendors.

That seems to be the best bet. The costly part is the GV unit. That set up should be unstoppable. I mentioned a twin 88 turbo big block car a few weeks ago on here and hes running that set up I mentioned. That car is expected to make over 2,000 hp, so I think the set up should work for U.
 
itll fit with a jw bell or an adapter plate but there is no way itll take the power your suggesting.period,.
 
itll fit with a jw bell or an adapter plate but there is no way itll take the power your suggesting.period,.

3rd that . The LS guys here are killing the fully built 4l60's around 600-700 HP.. That seems to be the hp level were they go out.
 
Back
Top