65mm TB with 70mm plenum

[89mulletbird]

Doing some spring cleaning on my car and took off the TB and plenum that a previous owner installed. I noticed the TB is 65mm and the plenum is 70mm (both Accufab). Should I blend the 65mm outlet of the TB to match the 70mm inlet of the plenum or is it not worth the effort? My car runs low 11s.

 

[turbo nasty]

I dont think you wll gain anything. at least not DAAAANG that made a difference wise

 

[forcefed3.8's]

You will gain nothing. You can put the stock stuff back on and lose nothing.

 

[89mulletbird]

I will lose the BLING! haha. Thanks, I will just keep it as is.