84/85 engine....ta33/te61, ported intake, 36lb blue tops....

[fbodlovr]

I have all of these parts on my 84 gn engine. The motor has something wrong, and all of these parts have basically NO use at all. The motor starts, runs fine, but has NO power. The turbo starts to spool, the engine revs up, but there is no power behind it. I think the rings might be bad. I would like to sell the engine COMPLETE with everything. If there is no interest, I will part it out then. Sorry mods for putting this here, but I dont think the hot air guys were seeing it in the parts for sale section.

36lb blue tops

ta33 w/te-61 center section. Will flow a little more than an average ta33
because of the bigger center section.

Ported 84-85 gn intake

Ported turbo elbow

New caspers injector harness

Will NOT come with 86/87 ingnition module, or coil. I MIGHT still have the original coil and module that I will throw in.

I would like to get 1200 plus shipping. Let me know, I AM negotiable!!!!!!

 

[blestx4]

no power

I built a 350 one time and put a comp cam and valve springs in it. I had same problem. It ran good but no power. Problem was I bought lifters at a local store that were a reputable name ....Not comp but they would not pump up to open valves all the way. I chased several other things I thought were issues until I found out several local engine builders had used the same hyd lifters and they would not pump up.
Just a thought. Good luck on the sale

 

[my85grandnation]

If you decide to part it out put me in line for the turbo.

 

[fbodlovr]

I am now parting it out. PM me with what you want, and Ill give you a price. I have EVERYTHING still. If its on an 84-85 gn engine, I have it. Only thing im not letting go, is the 86-86 ign. module, and coil. I THINK i still have the original 84 ign. module and coil though.

Let me know what you want. Im ready to deal, because another motor is going in, so this HAS to come out.

 

[fbodlovr]

my85grandnation, you're next in line for the turbo. $650 plus shipping, includes the ported elbow, and oil drain tube. If you want to pass, please say so.

Thanks

 

[krusty]

Pricing for parts Other than turbo ... thanks (maybe a "package" price, too?) vic

 

[fbodlovr]

krusty, are you wanting the entire engine, minus the turbo? Let me know, because that is the route I would rater go.