8445 Heads, Big 1.775" Ferrea Valves

[wormy-28]

Listing again....

stock 87 GN heads cut in for 1.775" intakes. These have been disassembled and checked, intake seats have a good 3 angle recently with the ferrea valves installed, guides ok. Exhaust seats factory cut with stock valves, guides ok. Valve height all within spec., good seals, and hd springs installed.
These can be used as is. I can only send pics to email,,,,sorry.





325 AS IS

I can get these freshened, bowl blend, exhaust valves backcut for 125
if you like.

 

[wormy-28]

heads

bump

 

[wormy-28]

heads

Ok, Heads are getting refreshed now with NEW SS exhaust valves, port/polish/bowl blend, clean/mag/valve job/resurface/paint. Pics are taken prior to machine/port work and new exhaust valves....
Should be ready in a week.
Accepting reasonable offers.